Hewlett Packard Enterprise HPE XP7, User Manual, Page: 191 / 311

• Reference code 601 xxx , 604 xxx , or 606 xxx : The pool usage rate of capacity ensured for writing
exceeds the threshold.
• Reference code 602 xxx or 605 xxx : The pool is blocked.
• Reference code 602ffe: Multiple pools are blocked.
• Reference code 603000: The Snapshot Estimated Manageable Capacity is less than 128 TB.
• Reference code 624000: You have reached capacity in the shared memory.
xxx indicates the pool ID. For details about reference codes of SIMs, contact HPE technical support.
You can check the SIMs occurring in storage systems from a Remote Web Console window. For
information about the Remote Web Console windows you can use for checking SIMS, see the
HPE XP7
Provisioning for Open Systems User Guide .
Use the following workflow to implement fixes:
1. Complete one of the following:
• For reference code 601 xxx , 602 xxx , 604 xxx , 605 xxx , 606 xxx , or 602ffe, recover the pool ("Normal"
status).
For more information about the countermeasures to take when the pool capacity ensured for writing
exceeds the threshold and when a pool was blocked, see
Workflow for correcting pool-related
failures (SIM = 601xxx, 602xxx, 604xxx, 605xxx, and 606xxx) on page 184.
• For reference code 624000, complete one of the following:
- Delete unused pools.
- Delete unused Fast Snap pairs.
- Delete unused THP V-VOLs.
- Shrink the capacity of the THP, Smart, or Real Time Smart Tier pool.
• For reference code 603000, perform one of the tasks listed for reference code 624000 above.
Although task completion is not a requirement, if it is not completed some time after reference code
603000 was issued, then reference code 624000 might be reported. In Remote Web Console,
enabling the Disable the alert notification of shared memory space warning option in the Edit Local
Replica Options window or using the
raidcom modify
local_replica_optset_system_opt
command in RAID Manager to set ID# 30, inhibits the
alarm notification of reference code 603000.
2. Clear the SIM from the storage system. Depending on the SIM's reference code, one of the following
occurs:
• The SIM is automatically completed.
• You manually complete the SIM.
3. (Optional) Use RWC to confirm that the SIM completed normally.
For more information about the Pools window and the Complete SIMs window, see the HPE XP7
Provisioning for Open Systems User Guide .
For more information about completing SIMs automatically and manually, see the HPE XP7 Remote Web
Console User Guide .
Troubleshooting Fast Snap 191