manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 169 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 169

Recovering blocked pools

The pool recovery time depends on pool or V-VOL usage and system workload. Calculate roughly 20
minutes of recovery time for every 100 TB of pool or V-VOL usage.

CAUTION: 

Recover blocked pools for disaster recovery purposes only.

Prerequisites

• You must have the Storage Administrator (Provisioning) role.

• In RAID Manager, use the 

raidcom modify pool -status nml 

command.

You can recover blocked pools using the 

Restore Pools

 window.

Procedure

1.

In the 

Explorer

 pane, click 

Storage Systems

, expand the storage system tree, and then click 

Pools

.

2.

In the 

Pools

 tab, from the list of pools, select the check box for the pool that you want to recover, click

More Actions

 > 

Restore Pools

, and then confirm the settings.

Recovering blocked pools

169

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments