manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 200 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 200

SSB2

RAID Manager
command

Cause of error

9747

paircreate

You cannot create the FS pair because you specified a Cnt Ac-S P-
VOL as the FS S-VOL.

9748

paircreate

You cannot create the FS pair because you specified a Cnt Ac-S S-
VOL as the FS S-VOL.

9749

paircreate

You cannot create the FS pair because you specified a Cnt Ac-J data
volume or journal volume in the intermediate site of 3DC cascading
configuration as the FS S-VOL.

974A

paircreate

You cannot create the FS pair because you specified a Cnt Ac-J P-
VOL as the FS S-VOL.

974B

paircreate

You cannot create the FS pair because you specified a Cnt Ac-J S-
VOL as the FS S-VOL.

974C

paircreate

You cannot create the FS pair because you specified a Cnt Ac-J
journal volume as the FS S-VOL.

974F

All commands

The command ended abnormally because the volume you specified
as the FS S-VOL has an S-VOL Disable attribute.

9752

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because the Max LBA size of the
volumes you specified as the FS P-VOL and S-VOL is different.

9753

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because the number of slots of the
volumes you specified as the FS P-VOL and S-VOL is different.

9754

paircreate

You cannot create the FS pair because you specified a THP V-VOL as
the FS S-VOL.

9756

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because you specified either of the
following for the FS S-VOL.

• External volume for which the Data Direct Mapping attribute is

enabled.

• Normal volume for which capacity expansion is enabled

These volumes can only be used as pool volumes.

9757

All commands

The command ended abnormally because you specified an Auto LUN
V2 source volume as the FS P-VOL.

For more information about using Auto LUN V2, contact HPE
Technical Support.

Table Continued

200

RAID Manager command reference for Fast Snap

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments