Hewlett Packard Enterprise HPE XP7, User Manual, Page: 183 / 311

Problem Causes and solutions
RWC times out frequently. Causes:
• RWC cannot respond to the SVP because the load is too heavy.
• The time-out period is not an adequate length.
Solutions:
• Wait until the process has completed and then retry the task.
• Verify the values for the RWC RMI time-out period .
For more information about how to set RMI time-out period, see the HPE XP7
Remote Web Console User Guide .
The pair information in the
Local Replication window
is not updated. The date
and time in
Last Updated
is not updated.
Cause: FS processing may be in progress.
Solution: The update will complete sometime after the FS processing finishes.
After a host completes a
write operation, the used
pool capacity shown in the
Summary section of the
Pools window and in the
list in the Primary
Volumes tab of the
selected pool do not
match.
Cause: The copy processing is running.
Solution: Wait until the copy processing is completed. The used pool capacity
shown in the
Summary section of the Pools window and in the list in the Primary
Volumes tab of the selected pool match.
For more information about viewing the used pool capacity in this section and on
this tab, see
Monitoring pool information on page 151.
Table Continued
Troubleshooting Fast Snap 183