Hewlett Packard Enterprise HPE XP7, User Manual, Page: 135 / 311

4. In the FS Pairs window, click More Actions > Assign Secondary Volumes .
5. From the Available LDEVs table, select the LDEV you want to assign as the S-VOL, and then click
Set .
The selected LDEV is displayed in the Secondary Volumes column of the Selected Pairs table.
NOTE:
• The Online Migration volumes do not appear in the Available Primary Volumes table.
• If you select a capacity in Capacity , the Available LDEVs and Selected Pairs tables display the
LDEVs that match the selected capacity.
• If you select a row in the Available LDEVs table and a row in the Selected Pairs table and then
click Set , you can configure a pair.
• If you select LDEVs that were assigned to an S-VOL with the Exclude Assigned Volumes check
box unchecked, the S-VOL to which snapshot data is assigned can be changed.
6. Click Finish , and then confirm the settings.
7. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the following:
\ / : , ; * ? " < > |
8. If you want to monitor the task after submitting it, select Go to tasks window for status .
9. Click Apply to submit the task.
More information
Assign Secondary Volumes window on page 293
Managing Fast Snap Pairs 135