Hewlett Packard Enterprise HPE XP7, User Manual, Page: 197 / 311

SSB2 RAID Manager
command Cause of error
9100 All commands You cannot run the command because the user authentication is not
performed.
9685 paircreate You cannot create the FS pair because of a shortage of pair tables.
9700 paircreate You cannot create the FS pair because the pool is not available.
9702 paircreate You cannot create the FS pair because you specified a pool ID
different from the pool ID used by existing pairs with the specified P-
VOL.
9703 paircreate You cannot create the FS pair because the volume you specified as
the P-VOL is already used by another FS S-VOL.
9704 paircreate You cannot create the FS pair because the volume you specified as
the S-VOL is already used by another FS P-VOL.
9705 paircreate You cannot create the FS pair because the volume you specified as
the S-VOL is already used by another FS S-VOL.
9706 paircreate You cannot create the FS pair because another FS pair is using the
snapshot ID you specified.
9707 paircreate You cannot create the FS pair because the capacity of the pair that
you are trying to create exceeds the amount of licensed capacity you
have reserved.
9718 All commands The command ended abnormally. You tried to use a command other
than
paircreate
for the volume in the pair other than the FS pair.
This error can also occur if you run the command with an unsupported
parameter specified.
9719 All commands The command ended abnormally because the pair is in a status that
the command does not accept.
This error can also be reported if you run the command with an
unsupported parameter specified.
971A paircreate You cannot create the FS pair because you do not have sufficient SM
capacity.
971F pairresync -restore You cannot restore the FS pair because the volume you specified as
the P-VOL has an S-VOL Disable attribute.
Table Continued
RAID Manager command reference for Fast Snap 197