Hewlett Packard Enterprise HPE XP7, User Manual, Page: 237 / 311

Item Description
◦ For BC W is displayed if the S-VOL has been written to, but it
cannot be read when its pair status is PSUS(SP)/PSUS or
PSUS.
◦ N is displayed when the S-VOL cannot be read because "-m
noread" is specified using RAID Manager.
◦ A hyphen (-) is displayed if the S-VOL has not been written to,
and it can be read.
◦ For FS W is displayed if the S-VOL has been written to when its
pair status is PSUS.
◦ A hyphen (-) is displayed if the S-VOL has not been written to.
◦ For BC MF W is displayed if the S-VOL has been written to
when its pair status is V-Split/SUSPVS or Split/SUSPOP.
◦ Protect is displayed if Protect is set from Business Continuity
Manager when S-VOL's pair status is Split/SUSPOP, SP-Pend/
TRANS, or V-Split/SUSPVS.
◦ A hyphen (-) is displayed when the S-VOL has not been written
to, and Protect is not set.
• T10 PI The S-VOL's T10 PI attribute information.
◦ Enabled The S-VOL's T10 PI attribute is enabled.
◦ Disabled The S-VOL's T10 PI attribute is disabled.
• Virtual Storage Machine The model type and serial number of the
virtual storage machine to which the S-VOL belongs.
• Virtual LDEV ID The identification number of the S-VOL’s virtual
LDEV. If no virtual LDEV ID is assigned, a blank is displayed.
• Virtual Device Name The name of the S-VOL’s virtual device, in a
combined format of "virtual emulation type", "number of virtual
LUSE volumes", and "virtual CVS attribute". Each of these three
items is displayed only if it is specified. If none of them are
specified, a blank is displayed.
• Virtual SSID The virtual SSID of the S-VOL. If no virtual SSID is
specified, a blank is displayed.
CTG ID The consistency group identification number.
Copy Pace The speed at which the S-VOL is copied.
A hyphen (-) is displayed.
Table Continued
Fast Snap GUI windows and wizards 237