manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 56 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 56

More information

XP7 Storage software applications for Fast Snap on page 20

Fast Snap shared memory requirements

Fast Snap requires dedicated shared memory (SM) for the Fast Snap pair management area.

The Fast Snap pair management area is an area used to store information for associating Fast Snap
pairs. It is automatically created when you install shared memory.

Additional shared memory is required when the total capacity of all pools exceeds 1.1 PB. When Thin
Provisioning, Smart Tiers, Real Time Smart Tier, Fast Snap, and dedupe and compression are used, the
capacity of a pool or V-VOL that can be created is also expanded according to the shared memory
expansion status.

The following table shows the shared memory requirements:

Shared memory function

Pool/V-VOL capacity

None*

Under 1.1 PB

THP/Smart/Real Time Smart Tier/FS Extension1

Under 3.4 PB

THP/Smart/Real Time Smart Tier/FS Extension2

Under 7.9 PB

THP/Smart/Real Time Smart Tier/FS Extension3

Under 12.3 PB

You can reduce or remove shared memory if the pools for Thin Provisioning, Smart Tiers, Real Time
Smart Tier, and Fast Snap have been deleted. When creating cascaded pairs or clone pairs, you must
add shared memory: 64KLDEV Extension, BC, VM Extension, TPF, iSCSI, dedupe and compression.

For more information about how to expand, reduce, or remove shared memory, contact HPE Technical
Support.

More information

Switching off the power supply on page 176

Deleting pools on page 170

Fast Snap volume requirements

Fast Snap operations require the following three types of volumes:

• P-VOLs: Contain the original data

• S-VOLs: Contain the snapshot of the original data in the associated P-VOL

• Pool-VOLs: Pool volumes that make up Fast Snap pools.

NOTE: 

The term "Pool VOLs" refers to Fast Snap pool volumes. For information about THP pool

volumes, see the 

HPE XP7 Provisioning for Open Systems User Guide

.

The following table lists the requirements for Fast Snap P-VOLs.

56

 Fast Snap shared memory requirements

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments