manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 198 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 198

SSB2

RAID Manager
command

Cause of error

9722

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because you specified either of the
following for the FS P-VOL.

• External volume for which the Data Direct Mapping attribute is

enabled.

• Normal volume for which capacity expansion is enabled

These volumes can only be used as pool volumes.

9723

All commands

The command ended abnormally because shared memory (64KLDEV
Extension) is not added.

9724

All commands

The command ended abnormally because shared memory (64KLDEV
Extension or greater) is not added.

9725

All commands

The command ended abnormally because the LDEV number of the
volume you specified as the FS P-VOL is beyond the specified range.

9726

All commands

The command ended abnormally because you specified an
unmounted volume as the FS P-VOL.

9727

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because you specified a blocked
volume as the FS P-VOL.

9728

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because you specified a volume that
is in the process of being shredded or formatted as the FS P-VOL.

9729

paircreate, pairsplit,
pairresync,
pairresync -restore

The command ended abnormally because you specified a volume as
the FS P-VOL, and that volume has an emulation type other than
OPEN-V.

972A

paircreate

You cannot create the FS pair because the volume you specified as
the FS P-VOL has the command device setting.

972C

paircreate

You cannot create the FS pair because the capacity of the volume you
specified as the FS P-VOL exceeds the supported size.

972E

paircreate

You cannot create the FS pair because the capacity of the volume you
specified as the FS S-VOL exceeds the supported size.

972F

paircreate

You cannot create the FS pair because you specified a V-VOL as the
FS P-VOL.

9730

paircreate

You cannot create the FS pair because you specified a pool-VOL as
the FS P-VOL.

Table Continued

198

RAID Manager command reference for Fast Snap

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments