Hewlett Packard Enterprise HPE XP7, User Manual, Page: 116 / 311

12. For Snapshot Group , select either Create New to assign the pair to a new snapshot group, or Use
Existing to assign the pair to an existing snapshot group. When you create a Fast Snap pair, you
must assign it to a snapshot group.
Complete one of the following:
• For Create New , enter values for Number of Snapshot Data per Primary Volume , Prefix , and
Initial Number , and then select Snapshot Group Configuration .
• For Use Existing , select Snapshot Group Configuration , and then select the snapshot group to
which you want to assign the pair from the Available Snapshot Groups table. If you select All ,
enter a value in Number of Snapshot Data per Primary Volume .
NOTE: To create pairs and assign the pairs to a snapshot group by using RAID Manager, see
Adding Fast Snap pairs to snapshot or consistency groups using RAID Manager on page 119.
13. Click Add .
The selected LDEV is moved to the Selected Primary Volumes table.
14. Click Next .
15. From the Available LDEVs table, select the LDEV you want to assign as the S-VOL, and then click
Set .
The selected LDEV is displayed in the Secondary Volumes column of the Selected Pairs table.
NOTE:
• The Online Migration volumes do not appear in the Available Primary Volumes table.
• If you select a capacity in Capacity , the Available LDEVs and Selected Pairs tables display the
LDEVs that match the selected capacity.
• If you select a row in the Available LDEVs table and a row in the Selected Pairs table, and then
click Set , you can configure a pair.
• If you select LDEVs which were assigned to an S-VOL with the Exclude Assigned Volumes
check box unchecked, you can change the S-VOL to which snapshot data is assigned.
16. Click Finish , and then confirm the settings.
17. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the following:
\ / : , ; * ? " < > |
18. If you want to monitor the task after submitting it, select Go to tasks window for status .
19. Click Apply to submit the task.
More information
Workflow for creating Fast Snap pairs using Remote Web Console on page 113
Adding Fast Snap pairs to snapshot or consistency groups using RAID Manager on page 119
Accelerating the Fast Snap pair deletion process on page 130
Create FS Pairs wizard on page 244
116 Managing Fast Snap Pairs