manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 208 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 208

Fast Snap GUI windows and wizards

Replication window

Use this window to perform the following tasks:

• Viewing replication summary information (see 

Viewing summary replication information

 on page

136).

• Opening the window from which you can view local replication summary information (see 

Viewing

local replication summary information

 on page 137).

• Opening the window from which you can set the system options that affect performance in Fast Snap

(see 

Changing system options that affect Fast Snap performance

 on page 108).

• Opening the window from which you can review the tasks that have been performed on a pair (see 

Viewing Fast Snap pair task history

 on page 147).

The following image shows the 

Replication

 window with the summary section at the top of the window

and the 

Replica LDEVs

 tab at the bottom.

Summary

This section is the table at the top of the 

Replication

 window that shows summary information about

replication.

The following table lists the items in this section of the 

Replication

 window.

208

 Fast Snap GUI windows and wizards

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments