manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 8 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 8

Fundamentals | Control model, software and features

  

8

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

Control model, software and features

This manual describes functions and features provided by controls
as of the following NC software numbers.

Control model

NC software number

TNC 640

340590-08

TNC 640 E

340591-08

TNC 640 Programming Station

340595-08

The suffix E indicates the export version of the control. The
following software options are unavailable or only available to a
limited extent in the export version:

Advanced Function Set 2 (option 9) limited to four-axis
interpolation

KinematicsComp (option 52)

The machine manufacturer adapts the usable features of the
control to his machine by the setting machine parameters. Some of
the functions described in this manual may therefore not be among
the features provided by the control on your machine tool.

Control functions that may not be available on your machine
include:

Tool measurement with the TT

In order to find out about the actual features of your machine,
please contact the machine manufacturer.

Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the HEIDENHAIN controls. Participation
in one of these courses is recommended to familiarize yourself
thoroughly with the control's functions.

Cycle Programming User's Manual:

All of the cycle functions (touch probe cycles and fixed
cycles) are described in the Cycle Programming User's
Manual. If you need this user's manual, please contact
HEIDENHAIN if required. ID: 892905-xx

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments