manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 399 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 399

Programming Q Parameters | Additional functions

 

10

 

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

399

Operating and programming notes:

If you output the same file multiple times in the
program, then, within the target file, the control
adds the current output after the previously output
contents.

In the 

FN16

 block, program the format file and the

log file with their respective file type extensions.

The file name extension of the log file
determines the file format of the output (e.g.,
TXT, .A, .XLS, .HTML).

In machine parameters 

fn16DefaultPath

(no. 102202) and 

fn16DefaultPathSim

 (no. 102203)

you can define a default path for outputting log files.

If you use 

FN16

 the file must not be UTF8-encoded.

You receive a great deal of relevant and interesting
information for a log file by means of the function 

FN

18

 (e.g., the number of the last touch probe cycle

used).

Further information:

 "FN 18: SYSREAD – Reading

system data", page 402

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments