HEIDENHAIN TNC 640, User Manual, Page: 527 / 948

Special Functions | Global Program Settings (option 44)
12
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
527
Shift (W-CS)
Refer to your machine manual.
Your machine tool builder can also disable individual
settings possibilities within the
Global Program Settings
function.
The
Shift (W-CS)
option in the
Global Program Settings
function
provides a coordinate transformation in the W-CS workpiece
coordinate system.
Further information: "Workpiece coordinate system W-CS",
page 151
The
Shift (W-CS)
option in the
Global Program Settings
function
takes effect on an axis-by-axis basis. The value is added to the shift
that takes place
before the machining plane is tilted as defined in
the NC program (e.g. Cycle 7
DATUM SHIFT
).
Control display
Unlike a datum shift in the NC program, the
Shift (W-CS)
option
in the
Global Program Settings
function affects the actual
position display.
The general status display shows the following icons:
No icon is displayed for offsets defined in the NC
program!
Shift (W-CS)
function active (default icon of the
Global Program Settings
function)
The
Shift (W-CS)
values are displayed on the
GS
tab of the
additional status display, the values from the NC program on the
TRANS
tab.