manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 29 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 29

Fundamentals | Control model, software and features

  

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

29

New functions 34059x-08

New function 

Global Program Settings

 (option 44), see "Global

Program Settings (option 44)", page 519

The new 

Batch Process Manager

 function enables you to

plan production orders, 

Further information:

 "Batch Process

Manager", page 665

New 

FUNCTION PROG PATH

 function for taking the entire

tool radius into account in 3-D radius compensation, see
"Interpretation of the programmed path", page 640

New 

FACING HEAD POS

 function for working with facing slides,

see "Using a facing slide", page 707

Touchscreen operation is supported, see "Operating the
Touchscreen", page 131

When an application is active on the third or fourth desktop, the
operating mode keys are also effective with touch operation,
see "Save elements and switch to the NC program", page 141

Using 

DRS

 it is now possible to define a cutter radius oversize

for a turning tool, see "Tool compensation in the program",
page 687, see "Tool data", page 688

The 

AFC

 function (option 45) can now also be used in turning

mode, see "Cutting force monitoring with the AFC function",
page 711

The 

M138

 function is now also effective in turning mode.

The 

TCPM

 function (option 9) was expanded by the selection

of the tool reference point and the center of rotation, see
"Selection of tool reference point and center of rotation",
page 629

New tool-oriented pallet machining function, see "Tool-oriented
machining", page 660

New pallet preset management, see "Pallet preset
management", page 659

If a pallet table is selected in a Program Run operating mode,
the 

Tooling list

 and 

T usage order

 are calculated for the

entire pallet table, see "Tool management (option number 93)",
page 270

New 

FUNCTION COUNT

 function for controlling a counter, see

"Defining a counter", page 564

New 

FUNCTION LIFTOFF

 function for retracting the tool from

the contour upon an NC stop, see "Lift off tool at NC stop:
FUNCTION LIFTOFF", page 581

Dynamic Collision Monitoring (DCM)

 is now also available in the

Test Run

 operating mode, see "Collision monitoring in the Test

Run operating mode", page 509

You can also open the tool-carrier files in the file management,
see "Tool carrier management", page 514

With the 

ADAPT NC PGM / TABLE

 function, you can also import

and modify freely definable tables, see "Importing tool tables",
page 252

The machine tool builder can define update rules that make it
possible, for example, to automatically remove umlauts from
tables and NC programs when importing a table, see "Importing
tool tables", page 252

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments