manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 68 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 68

First Steps with the TNC 640 | Overview

 

1

 

68

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

1.1

Overview

This chapter is intended to help users quickly learn to handle the
most important procedures on the control. For more information on
a respective topic, see the section referred to in the text.

The following topics are included in this chapter:

Machine switch-on

Programming the first part

Graphically testing the first part

Setting up tools

Workpiece setup

Running the first program

1.2

Machine switch-on

Acknowledging the power interruption and moving to
the reference points

DANGER

Caution: Danger for the operator!

Machines and machine components always present mechanical
hazards. Electric, magnetic or electromagnetic fields are
particularly hazardous for persons with cardiac pacemakers or
implants. The hazard starts when the machine is powered up!

Read and follow the machine manual

Read and follow the safety precautions and safety symbols

Use the safety devices

Refer to your machine manual.

Switching on the machine and traversing the reference
points can vary depending on the machine tool.

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments