HEIDENHAIN TNC 640, User Manual, Page: 576 / 948

Special Functions | Pulsing spindle speed FUNCTION S-PULSE
12
576
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
12.13 Pulsing spindle speed
FUNCTION S-PULSE
Programming a pulsing spindle speed
Application
Refer to your machine manual.
Read and note the functional description of the machine
tool builder.
Follow the safety precautions.
Using the
S-PULSE FUNCTION
you can program a pulsing spindle
speed, e.g. to avoid natural oscillations of the machine when
operating at a constant spindle speed.
You can define the duration of a vibration (period length) using the
P-TIME input value or a speed change in percent using the SCALE
input value. The spindle speed changes in a sinusoidal form around
the target value.
Procedure
Example
13 FUNCTION S-PULSE P-TIME10 SCALE5
Proceed as follows for the definition:
Show the soft-key row with special functions
Press the
PROGRAM FUNCTIONS
soft key
Press the
FUNCTION SPINDLE
soft key
Press the
SPINDLE-PULSE
soft key
Define period length P-TIME
Define speed change SCALE
The control never exceeds a programmed speed limit.
The spindle speed is maintained until the sinusoidal
curve of the
S-PULSE FUNCTION
falls below the
maximum speed once more.