HEIDENHAIN TNC 640, User Manual, Page: 507 / 948

Special Functions | Dynamic Collision Monitoring (option 40)
12
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
507
The following functions are available:
Soft key Function
Switch between wire-frame and solid-object
view
Switch between shadowed and transparent
view
Display/hide the coordinate systems that result
from transformations in the kinematics descrip-
tion
Functions for rotating, zooming and shifting
You can also use the mouse to change the display of the collision
objects.
The following functions are available:
In order to rotate the model shown in three dimensions you
hold the right mouse button down and move the mouse. If
you simultaneously press the shift key, you can only rotate the
model horizontally or vertically.
To shift the model shown: Hold the center mouse button or the
wheel button down and move the mouse. If you simultaneously
press the shift key, you can only shift the model horizontally or
vertically.
To zoom in on a certain area: Mark a zoom area by holding the
left mouse button down.
After you release the left mouse button, the control zooms in on
the defined area.
To rapidly magnify or reduce any area: Rotate the mouse wheel
backwards or forwards.
To return to the standard display: Press the shift key and
simultaneously double-click with the right mouse key. The
rotation angle is maintained if you only double-click with the
right mouse key.