manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 34 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 34

Fundamentals | Control model, software and features

  

34

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

New and modified cycle functions 34059x-08

New Cycle 453 

KINEMATICS GRID

. This cycle makes it

possible to probe a calibration sphere in multiple tilting-axis
positions predefined by the OEM. The measured deviations
can be compensated via compensation tables. Options 48

KinematicsOpt

 and 52 

KinematicsComp

 are required; the

machine tool builder has to adapt the feature to the respective
machine.

New Cycle 441 

FAST PROBING

. With this cycle you can set

various touch probe parameters (e.g. positioning feed rate) that
are globally effective for all subsequently used touch probe
cycles.

Cycles 256 

RECTANGULAR STUD

 and 257 

CIRCULAR STUD

were extended by the parameters Q215, Q385, Q369 and
Q386.

The recessing cycles 860 to 862 and 870 to 872 were extended
by the input parameter Q211. In this parameter, a dwell time
can be specified in revolutions of the workpiece spindle, which
retards the retraction after the recessing on the floor.

Cycle 239 ascertains the current load of the machine axes with
the LAC control function. In addition, Cycle 239 can now also
adjust the maximum axis acceleration. Cycle 239 supports the
determination of the load on synchronized axes.

The feed rate behavior in Cycles 205 and 241 was changed.

Changes of details in Cycle 233: Monitors the tooth length
(

LCUTS

) during finishing, increases the area by Q357 in the

milling direction when roughing with milling strategies 0 to 3
(provided that no limit has been set in the milling direction)

The technologically outdated Cycles 1, 2, 3, 4, 5, 17, 212, 213,
214, 215, 210, 211, 230, and 231 grouped under 

OLD CYCLES

can no longer be inserted using the editor. These cycles can still
be executed and edited, however.

The tool touch probe cycles, such as Cycles 480, 481 and 482,
can be hidden

Cycle 225 Engraving can engrave the current counter reading by
using a new syntax.

New SERIAL column in the touch probe table

Enhancement of the contour train: Cycle 25 with Residual
Material Machining, Cycle 276 Three-D Contour Train

Further information:

 Cycle Programming User's Manual

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments