manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 126 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 126

Introduction | Remote Desktop Manager (option 133)

 

2

 

126

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

Setting

Meaning

Input

Full-screen mode

 or 

User-

defined window size:

Size of the connection window

Required

Permit further connections

(share)

Enable access to the VNC server also by other VNC connections

Required

View only

The external computer cannot be operated in display mode

Required

Entries in the 

Advanced

options

 area

Available only to authorized specialists

Optional

With VNC, the screen of the external computer is mirrored
directly. The active desktop on the external computer is not locked
automatically.

With a VNC connection, it is also possible to completely shut down
the external computer via the Windows menu. As the computer
cannot be rebooted over a connection, it must actually be switched
off and on again.

Shutting down or rebooting an external computer

NOTICE

Caution: Data may be lost!

If the external computer is not shut down properly, data may be
irreversibly damaged or deleted.

Configure automatic shutdown of the Windows computer

Proceed as follows to configure the control:

Press the 

DIADUR

 key to open the HeROS menu

Select 

Remote Desktop Manager

The control opens the 

Remote Desktop Manager

.

Press 

New connection

Press 

Switch-off/restart of a computer

The control opens the 

Edit the connection

 pop-up window.

Edit the connection

Setting

Meaning

Input

Connection name:

Name of the connection in the Remote Desktop Manager

Required

Restarting after end of

connection:

Not necessary with this connection

–

Automatic starting upon

login

Not necessary with this connection

–

Add to favorites

Connection icon in the task bar:

Single click with the left mouse button

The control switches to the desktop of the connection.

Single click with the right mouse button

The control displays the connection menu.

Required

Move to the following

workspace

Not active with this connection

–

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments