HEIDENHAIN TNC 640, User Manual, Page: 656 / 948

Pallet Management | Pallet management
14
656
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Selecting pallet table
You can select or create a pallet table as follows:
Switch to the
Programming
mode or a program
run mode
Press the
PGM MGT
key
If no pallet tables are visible:
Press the
SELECT TYPE
soft key
Press the
SHOW ALL
soft key
Select a pallet table with the arrow keys, or enter
a name for a new pallet table (
.p
)
Press the
ENT
key
You can select either a list view or form view using the
Screen Layout
key.
Inserting or deleting columns
This function is not enabled until the code number
555343
is entered.
Depending on the configuration, a newly created pallet table may
not contain all columns. For tool-oriented working, for example, you
need columns that you have to insert first.
Proceed as follows to insert a column in an empty pallet table:
Open the pallet table
Press the
MORE FUNCTIONS
soft key
Press the
EDIT FORMAT
soft key
The control opens a pop-up window displaying
the available columns
Using the arrow keys, select the desired column.
Press the
INSERT COLUMN
soft key
Press the
ENT
key
You can remove the column with the
DELETE COLUMN
soft key.