HEIDENHAIN TNC 640, User Manual, Page: 273 / 948

Tools | Tool management (option number 93)
6
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
273
You can edit the tool data only in the form view. To
activate the form view, press the
FORM FOR TOOL
soft
key or the
ENT
key for the currently highlighted tool.
If you use the tool management without a mouse, then
you can activate and deactivate functions with the
-/+
key.
In the tool management, use the
GOTO
key to search for
the tool number or pocket number.
In addition, you can perform the following functions by mouse:
Sorting function: You can sort the data in ascending or
descending order (depending on the active setting of the soft
key) by clicking a column of the table head.
Arrange columns. You can arrange the columns in any sequence
you want by clicking a column of the table head and then
moving it with the mouse key pressed down. The control does
not save the current column sequence when you exit the tool
management (depending on the active setting of the soft key).
Show miscellaneous information in the form view: The control
displays tool tips when you leave the mouse pointer on an
active entry field for more than a second and when you have set
the
EDIT ON/OFF
soft key to
ON