HEIDENHAIN TNC 640, User Manual, Page: 166 / 948

Fundamentals, File Management | Creating and writing programs
4
166
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Programming tool movements in Klartext
To program a block, initiate the dialog by pressing a function
key. In the screen headline, the control then asks you for all the
information necessary to program the desired function.
Example of a positioning block
open the block
COORDINATES ?
10
(enter the target coordinate for the X axis)
Y
20
(enter the target coordinate for the Y axis)
Go to the next question with
ENT
.
Radius comp.: RL/RR/no comp.?
Enter
No radius compensation
and go to the
next question with
ENT
Feed rate F=? / F MAX = ENT
100
(enter a feed rate of 100 mm/min for this path contour)
Go to the next question with
ENT
.
MISCELLANEOUS FUNCTION M ?
3
(enter the miscellaneous function
M3 Spindle on
)
With the
END
key, the control ends this dialog.
Example
3 L X+10 Y+5 R0 F100 M3