HEIDENHAIN TNC 640, User Manual, Page: 658 / 948

Pallet Management | Pallet management
14
658
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Screen layout when working in the pallet table
If you want to see the NC program content and the content
of the pallet table at the same time, select the screen layout
PROGRAM
. During execution, the control then shows NC
program blocks to the left and the pallet to the right.
Editing pallet tables
If the pallet table is active in the
Program run, full sequence
or
Program run, single block
operating mode, the soft keys for
modifying the table in the
Programming
operating mode are
inactive.
You can modify this table with the
EDIT PALLET
soft key in the
Program run, single block
or
Program run, full sequence
operating mode.
Block scan in a pallet table
With the pallet management you can also use the
BLOCK SCAN
function in conjunction with pallet tables.
If you interrupt the processing of pallet tables, the control always
suggests the previously selected NC block of the interrupted NC
program for the
BLOCK SCAN
function.
Further information: "Block scan in pallet programs", page 838