HEIDENHAIN TNC 640, User Manual, Page: 671 / 948

Batch Process Manager | Batch Process Manager (option 154)
15
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
671
Editing a job list
There are two ways to create a job list:
In the pallet management
Further information: "Editing pallet tables", page 658
The control opens the pallet table (
.p
) in the
Batch Process
Manager
as a job list.
Directly in the
Batch Process Manager
You can edit a line in the job list in the
Batch Process Manager
as
follows:
Open the desired job list
Press the
EDIT
soft key
Place the cursor on the desired line, e.g.
Pallet
The control displays the selected line in blue.
The control displays the editable entries on the
right-hand side.
Press the
CHANGE WINDOW
soft key if required
The control switches the active window.
The following entries can be changed:
Name
Datum table
Preset
Locked
Editing possible
Confirm the edited entries by pressing the
ENT
key.
The control adopts the changes.
Press the
EDIT
soft key