manualshive.com logo in svg

HEIDENHAIN TNC 640, User Manual, Page: 567 / 948

Share
Download
HEIDENHAIN TNC 640 User Manual Download Page 567

Special Functions | Creating text files

 

12

 

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

567

Editing texts

Above the first line of the text editor, there is an information field
showing the file name, location and line information:

File:

Name of the text file

Line

:

Line in which the cursor is presently located

Column

:

Column in which the cursor is presently located

The text is inserted or overwritten at the location of the cursor.
You can move the cursor to any desired position in the text file by
pressing the arrow keys.

You can insert a line break with the 

RETURN

 or 

ENT

 key.

Deleting and re-inserting characters, words and lines

With the text editor, you can erase words and even lines, and insert
them at any desired location in the text.

Move the cursor to the word or line that you wish to erase and
insert at a different place in the text

Press the 

DELETE WORD

 or 

DELETE LINE

 soft key: The text is

deleted and stored temporarily.

Move the cursor to the location where you wish insert the text,
and press the 

INSERT LINE / WORD

 soft key.

Soft key

Function

Delete and temporarily store a line

Delete and temporarily store a word

Delete and temporarily store a character

Insert a line or word from temporary storage

Summary of Contents for TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments