HEIDENHAIN TNC 640, User Manual, Page: 768 / 948

Manual Operation and Setup | Compensating workpiece misalignment with 3-D touch probe
17
768
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Save table rotation in the preset table
You can save the misalignment of the rotary table in any row of the
preset table. The control stores the angle in the offset column of
the rotary table, e.g. in the C_OFFS column for a C axis.
Press the
TABLE ROT. IN PRESET TABLE
soft key after the
probing procedure
If appropriate, the control opens the
Overwrite active preset?
menu.
Press the
OVERWRITE PRESET
soft key
The control saves the offset in the preset table.
You may have to change the view in the preset table with the
BASE TRANSFORM./OFFSET
soft key for this column to be
displayed.
Show basic rotation and offset
If you select the
PROBING ROT
function, the control displays the
active angle of the basic rotation in the
Angle of basic rotation
input field and the active offset in the
Offset of rotary table
input
field.
In addition, the rotary angle and the offset are shown in the split
screen
P STATUS
screen layout on the
STATUS POS.
tab.
When the control moves the machine axis in accordance with the
basic rotation, a symbol for the basic rotation is shown in the status
display.
Rescind basic rotation or offset
Select the probe function by pressing the
PROBING ROT
soft
key
Enter
Angle of basic rotation
:
0
Or enter
Offset of rotary table
:
0
Apply with the
SET BASIC ROTATION
soft key
Or apply with the
SET TABLE ROTATION
soft key
To terminate the probe function, press the
END
soft key