HANSATECH FMS1 Manual Download Page 56

Page: 56 / 86

FMS 1 - Fluorescence Monitoring System

Insert

Modify

Delete

Some of these functions can be duplicated using the mouse to “drag” in new commands from the

icons or delete existing commands by “dragging” then to the waste paper basket.

Files

Once a script has been created it is sensible to store it to disc. Scripts may be stored to or

retrieved from *.SCR files using options under the Files menu.

Files

New Script

Save Script

Load Script

Text Search

The procedures for operating Files are the same as those described in

File Management

Download

A maximum of six script files can be down-loaded to the FMS and executed in the absence of a

computer via “Local mode” operation (

Section 3

). The Download menu is used to transfer the

script that is currently displayed in the Script Editor into one of the six protocol locations within

the control unit. The appropriate location is selected from the Download menu with the mouse or

accelerator key; a prompt indicates successful script transfer to the control box.

Download

Protocol 1

Protocol 2

Protocol 3

Protocol 4

Protocol 5

Protocol 6

When the instrument is first used Protocols 1 and 2 will contain default screening scripts which

measure Fv/Fm and fPSII. These, and any other script can only be over-written if they are unused

and thus do not have experimental data stored with them. This safe-guard is essential as the FMS

uses the loaded script to interpret the data that is stored on-board. Hence it is only possible to re-

use script locations if the data files from the instrument are up-loaded (

Section 3

) and the memory

cleared (

Clear Memory

)

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands