HANSATECH FMS1 Manual Download

Page: 30 / 86

FMS 1 - Fluorescence Monitoring System

Fig. 2-4

. During the saturation pulse (marked by the arrows) the fluorescence signal

exceeds the range of the A/D converter. The peak of the pulse is cut from the trace

but sampled (incorrectly) as 4095 bits by the software.

The peak fluorescence signal is effectively cut from the recording. This situation may be corrected

by reducing instrument gain (

Config Settings

) or re-orienting the fibre-optic further away from the

sample. If left un-corrected erroneous measurements of Fm and PSII will be stored when

measurements are made.

As referenced above, all of the FMS configuration and data management facilities are accessed

from the “drop-down” menu (C, Figure 2-1) whilst execution of measurements and on-line control

of instrument light sources is initiated via the

instrument toolbar (D, Figure 2-1). The following sections detail the configuration and data

management facilities available from the “drop-down” menu. Description of each item on the

instrument toolbar is given in

The Instrument Toolbar

3.3

Drop-Down” Menu Functions

The “drop-down” menu contains seven groups of related functions under the

following headings:

Files Script Hardware Graph Tools View Help

In this section the groups are described in three broad catagories:

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands