HANSATECH FMS1 Manual Download

Page: 22 / 86

FMS 1 - Fluorescence Monitoring System

Section 2: Software Installation, System Operation, Data
Handling

3.1

FMS Software

The FMS is supplied with two Windows software applications:

“Modfluor32” - Instrument control and trace data presentation program.

“Parview” - Parameter data upload and viewer program.

All of the software and on-line help documents are supplied on a CD ROM. The CD also contains

reference lists and links through to the Hansatech Instruments web site where updated versions of

software may be downloaded as and when they are released.

3.1.1

Installing FMS Software

The installation is launched from the Install button on the CD opening splash screen. Follow the

on-screen prompts in order to install Modfluor32 and Parview on your PC.

The installation automatically sets up a program group called “Hansatech Instruments”. This

contains a sub directory with icons for running both the “Modfluor” and “Parview” applications, an

“Uninstall” program and links to the help documentation.

PLEASE NOTE THAT THE FMS SOFTWARE IS A 32 BIT WINDOWS®

PROGRAM. THEREFORE, THIS SOFTWARE IS NOT COMPATIBLE WITH PC’S

RUNNING WIN 3.1.

3.1.2

Executing “Modfluor” and “Parview”

Both programs may be run without connection to the FMS. However in most circumstances they

will be used to communicate with the control unit. The RS232 serial cable must be connected from

either COMM 1 or COMM 2 serial port on the PC to the “Serial I/O” port on the FMS, the control

unit should be switched on and “PC” button pressed to select the “PC-mode” of operation (

Mode of Operation Under Modfluor

If you are using the system with the HAN/USB USB - RS232 adapter, ensure that you have correctly

installed the drivers for the adapter and that the adapter is securely connected to an available

USB port on the PC.

During initialisation the software tests the communications link. If the software is unable to

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands