HANSATECH FMS1 Manual Download

Page: 75 / 86

Section 3: Stand-Alone Instrument Operation and Data Upload

(lower key) returns the instrument to the “Run” menu without changing the selected script.

4.1.1.3

Checking instrument status

The status of the FMS may be checked at any time between scripts from the “Run” menu by

pressing the lower key (labelled “Stat”). The following information is displayed:

Full Data

Files 10

Free mem 99%

Battery 12.0V

Esc

“Full Data” refers to the information that is saved each time a script is executed. In “Full Data”

mode all of the data is recorded during measurement elements plus associated parameters. When

uploaded (

Data Upload to PC

) the data set is displayed as a chart recorder emulation in the data

recording area with parameters written to the “Parameters Window”.

DATA IS ONLY RECORDED DURING SCRIPT ELEMENTS WHICH INVOLVE

MEASUREMENTS. IF A FULL TRACE (INCLUDING FLUORESCENCE SIGNAL

DURING SCRIPT PAUSE ELEMENTS) IS REQUIRED THE “LOG” SCRIPT

ELEMENT MUST BE USED.

The default instrument setting stores full data information. However if fluorescence trace

information is not a priority it is possible to save memory space by selecting “Params only” mode

with the upper key (labelled

). In this mode only the measurement parameters associated

with logging elements (

Hansatech Scripting Language Elements

) are recorded. They should be

uploaded into “Parview”

Uploading Parameter Data to Parview

) feature is useful for screening

procedures where the emphasis is on a high throughput of numerical information rather than in-

depth analysis of fluorescence trace features.

The reduced requirement for data storage during the execution of each script also ensures that a

much larger number of scripts can be performed between instrument down-loads.

The “Status” menu also shows the number of data files currently stored in memory, the available

memory space and a spot reading of the instrument operating voltage. The instrument will

automatically issue a warning message before shutting down if the operating voltage drops below

10.5 V

The “More” key displays a new screen with real-time updated values of fluorescence, PAR and

temperature

Par: 1200

Esc

Temp: 10.1

Fluor: 2030

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands