HANSATECH FMS1 Manual Download

Page: 6 / 86

FMS 1 - Fluorescence Monitoring System

Introduction

The FMS 1 fluorescence monitoring system is a versatile pulse-modulated instrument, designed to

measure chlorophyll fluorescence emission from samples engaged in photosynthesis under

ambient or artificial light conditions in the laboratory.

It consists of a control unit housing all of the electronics, optics and light sources necessary to

derive most common fluorescence parameters. These are optically linked to the sample by a

statistically randomised fibre optic that is suitable for insertion into a range of sample containers

such as oxygen electrodes, gas analysis chambers, petri dishes and microtitre plates.

The system may be operated in several different modes: serial connection to a Windows PC

enables real-time instrument control and data presentation. Captured data is simultaneously

presented as a real-time chart recorder emulation and parameters-only format for easy

identification of key experimental events. This “PC” mode of operation is suitable for development

of complex protocols which may be programmed into the instrument using the simple “drag and

drop” editor to generate user-defined scripts. These scripts automate the execution of

experiments, allowing complex protocols involving many control events to be operated with the

same ease as single control event measurement such as Fv/Fm.

Once programmed, the FMS 1 can be operated as a stand-alone fluorometer inside the laboratory

or outside (via connection to an optional external battery). All measurement data and calculated

parameters are saved to integral protected memory. The unit can store up to six experimental

protocols, any one of which may be accessed and executed using the built-in menu system. When

data collection is complete the FMS can be down-loaded to the Windows software for full

analysis. This document aims to briefly cover the measurement principles used by FMS 1, optimum

hardware configuration, system operation and data handling with the “Modfluor” and “Parview”

software packages. The document is separated into three Sections:

Section 1: Measurement principles and hardware.

Section 2: Software installation, instrument operation and data handling.

Section 3: Stand-alone instrument operation and data upload.

Summary of Contents for FMS1























































































Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands

HANSATECH FMS1, Manual

Search results

Summary of Contents for FMS1

Reviews:

Related manuals for FMS1

Brands by name

Popular brands