HANSATECH FMS1, Manual

Page: 32 / 86

32 FMS 1 - Fluorescence Monitoring System
© 2017 Hansatech Instruments Ltd
3.3.1.3 Clear memory
Before initiating a new series of experiments it may be necessary to clear old files from the FMS
to make space for new data. In this case the clear memory should be selected. The software will
prompt to establish which files should be deleted (Figure 2-6).
Fig. 2-6 . Delete files selection prompt.
The software will delete from the file number entered by the user to the end of the memory space.
If file number 5 is entered into the above prompt box (Figure 2-7), files 5 through 10 (inclusive)
will be deleted (Figure 2-7).
Fig. 2-7 . File deletion prompt indicating that files 5 through 10 (inclusive) will be
deleted.
3.3.1.4 Set Time / Date
The FMS has an on-board timing chip which can be used to log when experiments are executed in
“Local” mode. The Set Time / Date hardware function allows the information within this chip to be
up-dated. The software will initially prompt to set the FMS clock to match that of the PC. If this is
not acceptable the user can manually enter the appropriate information into the time / date
prompt box that is generated (Figure 2-8).