Haivision F-MB21B-R, User Manual

Page: 298 / 420

CLI Command Reference
metadata
Makito X User’s Guide, v2.2, Issue 02 298
Network Source-specific parameters:
port n/a
Specifies the UDP port for a network
metadata source (i.e., the port on which to
listen for KLV messages).
1025..65,535
address n/a
(optional) Specifies the IP address for a
network metadata source. The address is
only required to:
• receive messages from a source that is
multicasting. In this case, you need to
provide the multicast IP address to which
the data is being sent. -OR-
• accept KLV messages coming from a
specific sender.
HD-SDI Source-specific parameters:
input bnc1
(optional, HD-SDI source only) Specifies the
Input port for the metadata source:
• bnc1
• bnc2
decimation none
(Optional) For KLV over SDI metadata input,
the ingested KLV messages can be frame-
decimated to reduce the bandwidth used by
the metadata service. Either specify the
decimation factor.
1..60
NOTE:
1
means no decimation,
2
means
divide the amount by half, etc.
Or you can specify another video encoder
that uses the same input and the metadata
AU rate will match the other video encoder’s
frame rate. To do so, enter
videncX
where X
is the actual encoder ID. See
“Metadata
Decimation”
on page 305
.
Parameter (Cont.) Default (Cont.) Description/Values (Cont.)