Haivision F-MB21B-R User Manual Download Page 155

Page: 155 / 420

Managing the Encoder

Managing Recordings

Makito

X User’s Guide, v2.2, Issue 02

155

From here you can pause and restart playback and adjust the volume.

When you hover the cursor over the controls, the progress/scrub bar and scrub handle
appear.

To move forward or backward through the video, drag the scrub handle along the
progress/scrub bar.

To switch to full-screen mode (i.e., to fill your entire screen and remove the player

controls), mouse over the viewer and click

(in the bottom right corner).

To exit full-screen mode, press ESC or click

again.

To return to the Recordings list, click

Back

Scrub Handle

Progress/Scrub Bar

Volume

Full-Screen

Play/Pause

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands