Haivision F-MB21B-R, User Manual

Page: 119 / 420

Managing the Encoder
Configuring Metadata Capture
Makito X User’s Guide, v2.2, Issue 02
119
KLV Tag Filtering (HD-SDI only
, see “Filtering UAS KLV Metadata Tags”
on
page 116)
UAS KLV Tag
Filtering
off Specifies a list of tag numbers/labels from
the UAS Datalink Local Set that are allowed
to be streamed. Tags
not
included in this list
will be discarded. Select either:
●
None
●
Minimum Set: the set of metadata objects
as define in MISB 0902.
●
All: the set of metadata objects as define in
MISB 0601.
UAS KLV Security
Tag Filtering
off Specifies a list of tag numbers/labels from
the Security Local Data set inside the UAS
that are allowed to be streamed. Tags
not
included will be discarded. Select either:
●
None
●
Minimum Set: the set of metadata objects
as define in MISB 0902.
●
All: the set of metadata objects as define in
MISB 0102.
TIP:
#48 must be included under UAS KLV
Tag Filtering .
Input Settings (Serial or Network input only)
Data Format
KLV Select the data format for the metadata.
●
KLV (Key Length Value) or
●
CoT (Cursor on Target).
NOTE:
To configure Serial input, the COM
Port Mode must first be set to Metadata (see
“Mode” on page 196).
CoT
must be specified upon purchase. For
details, refer to the
MakitoX CoT Addendum
.
Max AirCraft-SPI
Delta
0 ms (
CoT
only) Specifies the maximum delta
between SPI and Aircraft message time-
stamps for them to be considered a valid pair
that can be converted to KLV.
0..1000
ms
NOTE:
Only available if
CoT
has been
installed.
Sensor Discovery
Disabled (
CoT
input only) Check this checkbox to
enable discovery of SPI UIDs that will be
shown in the
SPI UID field below and can
then be potentially used as the SPI UID for
SPI message filtering.
Metadata Setting Default Description/Values (Cont.)