Haivision F-MB21B-R, User Manual

Page: 223 / 420

Managing Users and Security
Managing Security Policies
Makito X User’s Guide, v2.2, Issue 02 223
Change password
after
n/a if Disabled
90 days if
Enabled ( Password expiration must be enabled)
Type in the number of days after which
users must change their passwords (from
1-180 days).
Session Policies
Auto Logout
Disabled To enable Auto Logout, check the
checkbox.
This configures the Makito
X to
automatically log the user out after a
specified period of idle time. Systems that
are left logged on may represent a security
risk for an organization. If the user has
been inactive for longer than this period of
time, he/she will be automatically logged
out and redirected to the Login page.
Logout when idle
for
n/a if Disabled
15 minutes if
Enabled ( Auto Logout must be enabled)
Type in the maximum length of time the
system may be idle before the user will be
logged out (from 1 - 1440 minutes).
Cryptography Policies
Compliance
None Specifies the required cryptographic
compliance, either:
• None
• FIPS 140-2: Applies cryptographic
modules accredited under the Federal
Information Processing Standard (FIPS)
Publication 140-2.
• NDPP v1.1: Applies cryptographic
modules accredited under National
Information Assurance Partnership
(NIAP) Network Device Protection
Profile, Revision 1.1.
• SP800-52 Revision 1: Applies
cryptographic modules accredited under
the National Institute of Standards and
Technology (NIST) Special Publication
800-52, Revision 1.
NOTE:
Either selection reinforces security
for all management functions of the
encoder in terms of cryptography. This
setting takes effect upon the next reboot.
Policy Setting Default (Cont.) Description/Values (Cont.)