Haivision F-MB21B-R User Manual Download Page 142

Page: 142 / 420

Managing the Encoder

Configuring Streaming Outputs

Makito

X User’s Guide, v2.2, Issue 02

142

Idle Cells

Disabled

(

Traffic Shaping

must be enabled) When

enabled, Idle TS cells will be inserted into a
TS stream when necessary.

Delayed Audio

Disabled

(

Traffic Shaping

must be enabled) When

enabled, delays the transmission of audio
information to prevent MPEG-2 TS HRD
main buffer overflows.

Bandwidth

Overhead

15%

(

Traffic Shaping

must be enabled)

Specifies the percentage of network
bandwidth beyond the average rate that
the encoder is allowed to use if needed.
Range =

5..100%

NOTE:

To configure the Bandwidth

Overhead for CBR streams with metadata,
see

“Bandwidth Overhead for CBR

Streams with Metadata”

on page

132.

Still Image

Still Image When

Paused

n/a

Click Select to select an image from the
pre-defined list. See

SAP only

Transmit SAP

Off

Check this checkbox to enable SAP
announcements.

Name

n/a

If SAP is enabled, enter a unique name for
the Session.

Description

n/a

(Optional) Enter an expanded description
of the Session.

Keywords

n/a

(Optional) Enter one or more keywords to
associate with the Session. Keywords can
serve as filters.

Author

n/a

(Optional) Enter the name of the program’s
author.

n/a

(Optional) Enter the copyright information
for the session.

Address

n/a

Enter the SAP multicast advertising IP
address. Default=

224.2.127.254

Port

n/a

Enter the SAP advertising UDP port.
Default=

9875

Streaming Setting

Default

Description/Values (Cont.)

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands