Managing the Encoder
Configuring Streaming Outputs
Makito
X User’s Guide, v2.2, Issue 02
127
IMPORTANT
Audio sources should always be associated with the same video
interface for the dual channel SDI encoder. Selecting Analog or SDI audio sources
that do not originate from the same video source is
not
recommended as audio
artifacts will result at the decoder. For example, selecting video from BNC1 and audio
from BNC2 will cause audio artifacts. Analog audio must be associated with a single
BNC input.
4.
To add metadata to the stream, select the Metadata source, and (optionally) select the
encapsulation type (Data Carriage).
5.
To stream metadata from multiple sources, click
Add
next to the Metadata field and
select the next metadata source to add to the stream.
6.
(Makito
X with Storage only) To set up streaming, toggle the Streaming Parameters
button to
On
(as shown in the following example). This step is
not
required if your
encoder is not a Storage platform because streaming is already enabled.
