CLI Command Reference
videnc
Makito
X User’s Guide, v2.2, Issue 02
370
VIDENC
P
ARAMETERS
Parameter
Default
Description/Values
input
(SDI Dual-BNC only) The Video Input port for
the encoder:
SDI
• BNC1
• BNC2
timecode
None
Timecodes are used to mark video frames,
mainly for editing purposes. This field either
disables timecoding, or selects the source to
“timecode” the encoded video frame. The
following selections are available:
•
None:
No time code will be inserted in the
video stream (saves bandwidth if not
required).
•
Video:
The timecode will be extracted
from the incoming video signal.
•
System:
If no timecode is included in the
video feed, the encoded timecode is based
on the encoder’s system clock.
In this case, it is a good idea to enable NTP
(see
“Configuring Network Settings”
NOTE:
See
for currently supported TimeCode features.
aspectratio
Auto
Specifies the aspect ratio of the video source
and signals it into the MPEG stream:
•
Auto:
Aspect ratio is derived from the
incoming video source resolution.
•
3:2, 4:3, 5:3, 5:4, 16:9, 16:10, 17:9
:
Forces aspect ratio to specified value.
•
WSS/AFD:
Extracts aspect ratio from
incoming video source based on WSS
(Wide Screen Signaling) or AFD (Active
Format Description) if detected.
NOTE:
WSS is only supported with analog
PAL video; AFD is only supported with SD-
SDI video.
bitrate
6000 kbps
The Video Raw Elementary Stream bitrate
(kbps):
•
32..25000
