Managing the Encoder
Configuring Streaming Outputs
Makito
X User’s Guide, v2.2, Issue 02
140
Metadata PID
40
(Optional) Data (metadata) Packet
Identifier.
16..8190
PCR PID
33
(Optional) (Program Clock Reference)
Packet Identifier. Timestamp in the TS from
which the decoder timing is derived.
16..8190
PMT PID
32
(Optional) (Program Map Table) Packet
Identifier.
16..8190
Transport Stream
ID
0
(Optional) Transport Stream ID. Identifies
the transport stream in the Program
Association table (PAT) of the TS stream.
0..65535
Program Number
1
(Optional) Program Identifier used in the
Program Map Table (PMT) of the TS
stream.
0..65535
Destination
Address
n/a
Enter the destination IP address in dotted-
decimal format.
For multicast addresses, see
(RTMP only)
(If RTMP protocol is selected as the stream
type) Enter a Fully Qualified Domain Name
(FQDN) for the application endpoint.
NOTE:
and Flash Interoperability (RTMP)”
Port(s)
n/a
Enter the destination UDP port(s). Enter a
number in the range
1025..65,535
. Note
that RTP streams use
even numbers only
within this range.
NOTE:
Direct-RTP streams require
different UDP ports for video and audio.
You must specify the second port number.
Streaming Setting
Default
Description/Values (Cont.)
