System Administration and Storage
Enabling and Disabling Network Services
Makito
X User’s Guide, v2.2, Issue 02
190
Enabling and Disabling Network Services
For security purposes, an administrator may need to stop one or more network services
from accessing the Makito
X. From the Services page, you can enable and disable the
following network services: HTTP, SSH, Telnet, SNMP, VF, and Talkback.
On the Makito
X with SDI, you can also enable bi-directional serial pass-through for
controlling serially attached devices such as PTZ controlled cameras. Both RS-232 and RS-
422 are supported.
To enable or disable network services:
1.
On the Administration page, click
S
ERVICES
from the sidebar menu.
The Services page opens displaying the current status of network services, as shown in
the following example.
2.
To enable or disable a service, check or clear the associated checkbox. See the
following section,
3.
To apply your changes, click
Apply
.
The service(s) will be stopped or started immediately.
