Haivision F-MB21B-R User Manual Download Page 144

Page: 144 / 420

Managing the Encoder

Configuring Streaming Outputs

Makito

X User’s Guide, v2.2, Issue 02

144

SSRC

(RTP only) The synchronization source.

Sent Packets

Number of RTP or UDP packets sent for that stream.

Sent Bytes

Number of Bytes sent for that stream.

Unsent Packets

Number of RTP or UDP packets not sent for that
stream.

Unsent Bytes

Number of Bytes not sent for that stream.

Last Error

The last logged error (number and description).

Occurred

The time at which the last error was logged (i.e., how
long ago).

Bitrate

The stream bitrate (in kbps).

Click to reset the Output statistics.

SRT

Reconnections

Number of reconnections since the stream started.
Severe network congestion may cause the connection
to drop and automatically reconnect.

AES Encryption

Indicates whether Advanced Encryption Standard
(AES) encryption has been enabled.

Key Length

The key length for AES encryption, either: None, AES-
128, or AES-256

Peer Decryption

Indicates whether the decoder can decrypt the
stream.
Either Active, Initializing, Inactive (no passphrase), or
Inactive (invalid passphrase).

Resent Packets

Number of packets retransmitted following a lost
report from the decoder.

Resent Bytes

Total bytes of the lost packets retransmitted.

Dropped Packets

Number of dropped packets.

Dropped Bytes

Number of dropped bytes.

Received ACKs

Transmission progress acknowledgment and
feedback.

Received NAKS

Lost packet reports.

Max Bandwidth

Maximum bandwidth (input stream rate * (1 +
overhead)).

Streaming Statistic

Description/Values (Cont.)

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands