Managing the Encoder
Configuring Metadata Capture
Makito
X User’s Guide, v2.2, Issue 02
110
11.
To view Metadata statistics, click
Statistics
. For details, see
12.
To return to List View, click
M
ETADATA
from the sidebar menu.
Configuring Network Metadata Sources
You can configure the Makito
X to capture metadata from a user definable network port
(up to eight UDP inputs). The encoder can receive either (a) KLV payload encapsulated in
UDP or (b) CoT inside UDP that is converted to KLV and then streamed (see
with SPI Message Filtering Based on UID”
You must specify the UDP port on which the Makito
X
will
listen
for
incoming
metadata.
However, the
is only required for reception of multicast metadata, or if you only
want to accept messages coming from a specific sender.
To add a network metadata source:
1.
From the Metadata List View, click
Add
.
2.
On the New Metadata Source dialog, select Network for the Metadata Type and click
Continue
.
The Create New Metadata Source page opens (as shown in the following Network
source example).
