Installing the Encoder
Resetting the Encoder
Makito
X User’s Guide, v2.2, Issue 02
58
Resetting the Encoder
This section describes the procedures to perform either a Power Reset or Factory Reset.
•
A
Power Reset
is equivalent to simply powering the unit off and on.
•
A
Factory Reset
powers the unit off and on, and returns the encoder to the same
settings it originally had when shipped from Haivision, including the factory default IP
address, subnet, and gateway.
After a Factory reset, only the firmware revision, serial number, MAC address, and XR
personality are preserved. Everything else is wiped out (including saved presets, added
user accounts, modified passwords, and encoding settings).
To reset the Makito
X:
1.
With the encoder on, insert a small plastic tool into the small opening labeled
Reset
on the Makito
X
faceplate.
Figure 2-13
Reset micro switch
2.
Power Reset:
For a power reset, press the micro switch (you will feel the button
depress) for at least one second and release. Be sure to release the button in less than
five (5) seconds.
This resets the unit.
-or-
Factory Reset:
To reset the Makito
X to its factory default settings, press the micro
switch (you will feel the button depress) and hold for five (5) seconds.
The Makito
X will reboot on its own. As soon as the lights stop blinking and the Status
LED is solid green, the encoder is ready.
Reset Micro Switch
