Haivision F-MB21B-R User Manual Download Page 33

Page: 33 / 420

Introduction

Physical Description

Makito

X User’s Guide, v2.2, Issue 02

Audio/Video Interfaces (Rear Panel)

NOTE

The Analog Audio interface is the same for both the Makito

X DVI (#S/B-292E-

DVI) and the Makito

X SDI (#S/B-292E-HDSDI2).

Makito

X DVI-I Video and Embedded Audio Interface

The Makito

X DVI video interface consists of a single DVI-I connector (shown below).

Figure 1-16

DVI-I Video Interface (#S/B-292E-DVI)

The DVI-I connector supports the following inputs:

●

Component Analog video (Y,Pb,Pr / RGBHV)

●

Component Digital video (Y,Cb,Cr / DVI)

●

SD and HD video

●

Computer graphics

●

Two channels of DVI-I digital audio

Only one input format – either digital (DVI-D) or analog (DVI-A) – is encoded at a time.

NOTE

Additional Information:

• The Makito

X encoder supports EDID resolution capabilities negotiation.

• If the content is HDCP copy-protected, the stream will not be encoded.

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands