Haivision F-MB21B-R User Manual Download Page 179

Page: 179 / 420

System Administration and Storage

Saving and Loading Presets

Makito

X User’s Guide, v2.2, Issue 02

179

The startup preset is indicated with a blue check.

To load an existing preset into the current session, hover over the preset name or
anywhere in the row and click

Load

To select an existing preset to load at startup, hover over the preset row and click the
(grayed out) checkmark under

Startup

To save the current settings as a new preset, click

Add

a. In the New Preset dialog, type a new filename in the Name text box.

Startup Preset

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Haivision F-MB21B-R, User Manual, Page: 179 / 420

Search results

Summary of Contents for F-MB21B-R

Reviews: