Haivision F-MB21B-R User Manual Download Page 56

Page: 56 / 420

Installing the Encoder

Powering Up the Unit

Makito

X User’s Guide, v2.2, Issue 02

Figure 2-12

Single or Double-Height Chassis Power Adapter 12VDC with Conxall
Connector

NOTE

There is no power switch on the Makito

X appliance. The power is automatically

on when the unit is plugged in. The power supply cord is used as the main disconnect
device.

Ensure that the AC socket outlet is located near the equipment and is easily accessible.

To power up the Single-Height or Double-Height Chassis:

Insert the Conxall connector on the 12V power supply into the Power input jack at the
rear of the Makito

CAUTION

To prevent damage to the encoder and/or power supply, be sure to connect

the power supply to the chassis

first

and then to the AC source.

Always use the AC power cord and power supply provided with the unit. The single and

dual-height chassis have different power supply units and chassis connectors.

Make sure the connector is properly inserted and locked to avoid intermittent power
problems.

Connect the power cord to the power supply and plug the cord into a grounded AC
power source.

The Status LED will start blinking green, indicating that the encoder is booting up.

Wait until the Status LED stays solid green, indicating that the encoder is ready for
operation.

Conxall Connector

Summary of Contents for F-MB21B-R





































































































































































































































































































































































































































Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands

Haivision F-MB21B-R, User Manual

Search results

Summary of Contents for F-MB21B-R

Reviews:

Related manuals for F-MB21B-R

Brands by name

Popular brands