Managing the Encoder
Configuring Video Encoders
Makito
X User’s Guide, v2.2, Issue 02
86
Video Encoder Settings
The following table lists the Video Encoder controls and settings:
Video Encoder
Setting
Default
Description/Values
Input
Input
Select the Video Input port for the encoder:
SDI
BNC-1
●
BNC-1
●
BNC-2
●
BNC-3*
●
BNC-4*
NOTE:
*BNC-3 and BNC-4 only available on
Makito
XR.
DVI
DVI
●
DVI (read-only)
Input Format
n/a
This is the input signal auto-detected from
the video source. It includes the number of
pixels per line, whether the video is
interlaced or progressively scanned
(indicated by
i
or
p
), and the number of
frames per second.
NOTE:
If the signal cannot be detected (or is
outside the supported range), the Input
Format will be
Unknown
.
Copy Protected
Content
DVI only
n/a
(Read-only) Indicates whether or not the
video source connected to the Makito
X
DVI
is protecting/encrypting its output. If Yes, the
stream will not be encoded.
Input Settings
Type
Select the Video Input type for the encoder:
NOTE:
Automatic mode will cause
increased delay during an input switch event.
To reduce the re-lock delay, set the Input
Type to SDI or Composite as appropriate.
BNC-1 or 2
Automatic
●
Automatic
●
SDI
●
Composite
BNC-3 or 4
(Makito
XR
only)
DVI
Automatic
●
Automatic
●
Digital (HDMI/DVI)
●
Analog (Component/RGB)
