GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1
V
IVID
I
N
AND
V
IVID
Q
N S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8-139
8-5-10
Software Roll-back Procedure
In the event that it is necessary to save and restore the Operating System and Application Software,
use the software roll-back (Re-ghost) tool provided, as described in the procedure in
NOTE:
Using the Rollback tool requires the Software Installation CD. Always keep this near the scanner.
Table 8-7
Software Roll-back Procedure
Step
Instruction
Expected Result
1
Eject the battery and remove all peripherals currently
connected to the system, with the following exceptions:
Make sure no peripherals are connected to the USB
connectors except the DVD and the PCMCIA.
2
Press the <Eject> button of the DVD\CD-RW drive and
remove any media if present.
The DVD\CD-RW drive tray ejects.
3
Insert the CD provided with the software kit, and press
the <Eject> button again.
The DVD\CD-RW drive tray will load the software CD.
4
Hold down the <ON/OFF> button for 5 seconds to
shutdown the system.
The shutdown options are displayed on-screen.
5
Select
Full Shutdown
.
The system powers down.
6
Hold down the <ON/OFF> button for three seconds.
The system powers ON and when system boot-up from the CD is complete, the
following message is displayed prompting you to select the required option:
7
Select option
B
.
Service Tools
The user is prompted for a password.
8
When prompted, type the following password:
geulsservice
and press
<
Enter
>.
Note: when typing the password, use lower-case letters.
Wait until the following message is displayed, prompting you to select the
required Tools option:
Summary of Contents for Vivid in
Page 2: ......
Page 30: ...GE HEALTHCARE DIRECTION FQ091013 REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL xxviii...
Page 739: ......
